BS 10-2009 Publishing and copyright information he BSI copyright notice displayed in this document indicates when the document was last issued.
|
ID： |
965110C97F52405C9EA39254B013846C |
|
文件大小(MB)： |
1.47 |
|
页数： |
50 |
|
文件格式： |
|
|
日期： |
2010-10-4 |
|
购买： |
文本摘录（文本识别可能有误，但文件阅览显示及打印正常，pdf文件可进行文字搜索定位）：
Specification for flanges,and bolting for pipes, valves,and fittings,BS 10:2009,raising standards worldwide.,NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW,BSI British Standards,BS 10:2009 BRITISH STANDARD,Publishing and copyright information,The BSI copyright notice displayed in this document indicates when the,document was last issued.,. BSI 2009,ISBN 978 0 580 61296 1,ICS 23.040.60,The following BSI references relate to the work on this standard:,Committee reference PSE/15,Draft for comment 08/30174939 DC,Publication history,First published as BS 10-1:1947, BS 10-2:1926, BS 10-3:1929, BS 10-4:1931,and BS 10-5:1932,First published as BS 10, December 1962,Second (present) edition, April 2009,Amendments issued since publication,Date Text affected,BRITISH STANDARD,. BSI 2009 ?i,BS 10:2009,Contents,Foreword iii,1 Scope 1,2 Normative references 1,3 Design temperature and pressure 2,4 Designation 2,5 Flange dimensions 2,6 Flange materials 3,7 Attachment of flanges 4,8 Hydraulic testing of flange joints 4,9 Certification 4,10 Low temperature flanges and bolting 6,Annexes,Annex A (informative) Information to be supplied by,the purchaser 33,Annex B (informative) Minimum requirements of steel to be used for,flanges in Table A to Table H 34,Annex C (normative) Bolts and nuts 37,Bibliography 41,List of figures,Figure 1 – Shaped stud bolt (see C.4) 25,Figure 2 – Application diagram for bolts and stud-bolts: carbon,and flanges 26,Figure 3 – Steel or copper alloy plain flange 28,Figure 4 – Steel boss flange 29,Figure 5 – Integrally forged or cast steel flange for valves only 30,Figure 6 – Steel welding neck flange (see Table D to Table T) 31,Figure 7 – Integrally cast iron flanges (see Table F and Table H) 32,List of tables,Table 1 – Flange materials – minimum requirements 3,Table 2 – Temperature/pressure ratings for carbon steel flanges,[see Annex B] 5,Table A – Dimensions of plain, boss, integrally cast or forged flanges,(for ratings see Table 2 and Annex B) 7,Table D – Dimensions of plain, boss, integrally cast or forged and,welding neck flanges (for ratings see Table 2 and Annex B) 9,Table E – Dimensions of plain, boss, integrally cast or forged, and,welding neck flanges (for ratings see Table 2 and Annex B) 12,Table F – Dimensions of plain, boss, integrally cast or forged, and,welding neck flanges (for ratings see Table 2 and Annex B) 14,Table H – Dimensions of plain, boss, integrally cast or forged, and,welding neck flanges (for ratings see Table 2 and Annex B) 16,Table J – Dimensions of plain, boss, integrally cast or forged, and,welding neck flanges (for ratings see Table 2 and Annex B) 18,Table K – Dimensions of plain, integrally cast or forged, and welding,neck flanges (for ratings see Table 2 and Annex B) 19,Table R – Dimensions of plain, integrally cast or forged, and welding,neck flanges (for ratings see Table 2 and Annex B) 21,Table S – Dimensions of plain, integrally cast or forged, and welding,neck flanges (for ratings see Table 2 and Annex B) 22,Table T – Dimensions of plain, integrally cast or forged, and welding,neck flanges (for ratings see Table 2 and Annex B) 24,Table B.1 – Grey cast iron properties 34,Table B.2 – Temperature/pressure ratings for grey cast iron and,malleable cast iron flanges [see Clauses 5g) and 5h)] 35,BS 10:2009,ii ?. BSI 2009,BRITISH STANDARD,Table B.3 – Temperature/pressure ratings for copper alloy flanges,sizes 1.2 in to 3 in (inclusive) [see Clause 5j)] 35,Table B.4 – Temperature/pressure ratings for copper alloy flanges,sizes over 3 in [see Clause 5f)] 36,Table C.1 – Application of bolts and stud-bolts [see Figure 2a),and Figure 2b)] 37,Table C.2 – Materials, dimensions and finish of bolts, stud-bolts,and nuts 39,Summary of pages,This document comprises a front cover, an inside front cover,pages i to iv, pages 1 to 42, an inside back cover and a back cover.,BRITISH STANDARD,. BSI 2009 ?iii,BS 10:2009,Foreword,Publishing information,This British Standard is published by BSI and came into effect on,30 April 2009. It was prepared by Technical Committee PSE/15,Flanges. A list of organizations represented on this committee can be,obtained on request to its secretary.,Supersession,This British Standard supersedes BS 10:1962, which is withdrawn.,Information about this document,It should be noted that, apart from cast iron flanges, the hydraulic test,pressure applied to a flange joint is limited to one-and-a-half times,the highest rated pressure of the flange (see Clause 8).,This is a full revision of the standard, and introduces the following,principal changes:,?Materials have been updated;,?The standard has been re-arrange……
……